<li id="860oy"></li>
  • <samp id="860oy"><pre id="860oy"></pre></samp>
    <ul id="860oy"><pre id="860oy"></pre></ul>
  • <tr id="860oy"><menu id="860oy"></menu></tr>
  • <strike id="860oy"></strike>
    <samp id="860oy"><tbody id="860oy"></tbody></samp>
    <li id="860oy"></li>
  • 加載中...

    點擊這里給我發消息

    QQ群:417857029

    國內外新聞動態

    Hexcel在2018JEC全球復合材料展:航空航天、汽車和海洋工業的創新

    來源:SpecialChem2018年03月08日

    閱讀次數:

        Hexcel at JEC World 2018: Innovations for Aerospace, Automotive & Marine Industry

        At JEC World 2018 Hexcel is display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.

         Banner at Exhibit Hall

         Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs.

      Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. 

        Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

    Hexcel在2018JEC全球復合材料展:航空航天、汽車和海洋工業的創新

          Aerospace Promotions

        Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. 

        HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

       Aircraft engines benefit from a number of Hexcel technologies that are being promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

        Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. 

          An example of this technology is on display at JEC 2018.

        Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.

        Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures are being promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

         Newly Introduced Product Range

       Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies.

       Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.

        Launch of HexBond™ Brand

        Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.

        Planet Aerospace area at JEC

    Hexcel在2018JEC全球復合材料展:航空航天、汽車和海洋工業的創新

        In the Planet Aerospace area at JEC, Daher and Hexcel is jointly displaying an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part.

        The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

          Automotive Promotions at JEC

        Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901.

         In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. 

        Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties.

         It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. 

         Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components. 

        Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. 

        Visitors to Hexcel’s stand at JEC can see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.

      Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

          Product Offerings for Marine Industry

        Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.

        Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

        Innovations for Wind Energy

       Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades.

         Launch of Surface Finishing Prepreg

        Hexcel is also launching its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

    Hexcel在2018JEC全球復合材料展:航空航天、汽車和海洋工業的創新

    • 標簽:
    相關閱讀

    本站所有信息與內容,版權歸原作者所有。網站中部分新聞、文章來源于網絡或會員供稿,如讀者對作品版權有疑議,請及時與我們聯系,電話:025-85303363 QQ:2402955403。文章僅代表作者本人的觀點,與本網站立場無關。轉載本站的內容,請務必注明"來源:林中祥膠粘劑技術信息網(www.423344.com)".

    網友評論

    ©2015 南京愛德福信息科技有限公司   蘇ICP備10201337 | 技術支持:南京聯眾網絡科技有限公司

    客服

    客服
    電話

    1

    電話:025-85303363

    手機:13675143372

    客服
    郵箱

    2402955403@qq.com

    若您需要幫助,您也可以留下聯系方式

    發送郵箱

    掃二
    維碼

    微信二維碼
    国产精品美女久久久免费| 北岛玲在线精品视频| 久久精品国1国二国三| 久久99亚洲综合精品首页| 日韩免费在线观看| 一本色道久久88综合日韩精品| 久热国产精品视频一区二区三区| 久久精品久久久久观看99水蜜桃| 无码日韩人妻精品久久蜜桃| 精品久久久久久久久中文字幕| 国产一区二区三区精品视频| 亚洲国产成人精品女人久久久 | 午夜精品久久久久久久99| 岛国精品在线观看| 久久久精品人妻久久影视| 99久久综合国产精品免费| 久久乐国产综合亚洲精品| 国内精品久久久久影院亚洲| 最新露脸国产精品视频| 国产精品成人观看视频国产| 久久精品国产亚洲AV蜜臀色欲| 91freevideos精品| 91自产拍在线观看精品| 91亚洲精品第一综合不卡播放| 99国产精品99久久久久久| 蜜芽亚洲av无码精品色午夜 | 国产精品原创巨作av| 国产精品亚洲五月天高清| 国产精品久久久久久福利| 国产一区二区三区国产精品| 日韩视频中文字幕精品偷拍| 国产日韩亚洲大尺度高清 | 国产精品无打码在线播放| 国产精品乱码一区二区三区| 国产精品久久久99| 少妇人妻偷人精品一区二区 | 日韩亚洲综合精品国产| 国产精品无码素人福利免费| 国产成人亚洲精品无码AV大片| 日韩精品无码一区二区三区| 精品一区二区三区在线播放|